Opening Hour

Mon - Sat, 9:00 - 6:00

Call Us

+91-9323405785

Email Us

info@vertexmachines.com

Rub Resistance Tester/Scuff Tester

This equipment is intended to evaluate the Rub Proofness of prints on paper or board. It can also be used to measure / evaluate Colour Transfer from printed / coated surface during rubbing. The application can be extended for measurement of abrasion resistance of some Plastic materials / Aluminum Foils. Principle : In this machine, 2 samples of the same substrate are rubbed against each other in the same plane, under a constant pressure of 2 p.s.i and at a fixed speed of 60 RPM. The number of rubs are recorded using a non-contact type digital counter. Inference : This machine works as a great comparator of the variations in print quality between various batchesor various suppliers Higher Rub Resistance = better print quality. Lower Rub Resistance = poor print quality.



       

 

This equipment is intended to evaluate the Rub Proofness of prints on paper or board. It can also be used to measure / evaluate Colour Transfer from printed / coated surface during rubbing. The application can be extended for measurement of abrasion resistance of some Plastic materials / Aluminum Foils.

 

Specimen Size 2 inch and 4.5 inches Diameter
Weight on Sample 2psi & 4psi separate weights
Controls Digital Preset Cycle counter
No. of Cycles 0 - 9999, 9999
Paint Powder coated & Chromate finished
Input Power 230 Volts, 50/60Hz, single phase supply

 

• The highest degree of parallelity of disc samples.
• Accurate R.P.M. of rotating disks assured by High torque Step Synchronous motors
• Very Low Noise Level.
• Compact but Sturdy Design
• Very Low power consumption (Less than 100w).
• User - Friendly Electronic Controls.
• Non - Contact Type Sensor for Rub Counter makes it maintenance free.